ÿWPCL ûÿ2BJ|xÐ ` ÐÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH øÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐÐ °°°è ÐÁà1ÁÑ Âx„|ü@Ž ÑÐ Å@8Ø'@8Ø'Å ÐÓÓÃÃContents of Recommendation Q.512Äă Áà-ÁEXCHANGE INTERFACES FOR SUBSCRIBER ACCESSƒ 1.ÁHÁGeneral 2.ÁHÁScope of Recommendation Ð 8 Ð3.ÁHÁCharacteristics of digital exchange interfaces for subscriber access 4.ÁHÁCharacteristics of analogue exchange interface for subscriber access 5.ÁHÁCombined digital and analogue interface for subscriber access ÃÃRecommendation Q.512ÄÄ ÁàÐ8ÁEXCHANGE INTERFACES FOR SUBSCRIBER ACCESSƒ 1.ÁHÁÃÃGeneralÄÄ Ð X ÐÁHÁThis Recommendation applies to digital local and combined exchanges for telephony in Integrated Digital Networks (IDN) and mixed (analogue/digital) networks, and also to local and combined exchanges in Integrated Services Digital Networks (ISDN). The field of application of this Recommendation is more fully defined in Recommendation Q.500. 2.ÁHÁÃÃScope of RecommendationÄÄ ÁHÁExchange interfaces for subscriber access that have been considered are described, and illustrated in Figure 1/Q.512 and Table 1/Q.512, but it is not intended to specify every interface. Other interfaces are for further study (e.g. those for dynamic multiplexed basic rate access, broadband access, etc.). ÁHÁThis Recommendation is not intended to define any transmission system, network or subscriber equipment in or connected to, a digital exchange via these interfaces. Therefore only the characteristics of the interfaces are described. ÁHÁDigital exchange interfaces for subscriber access are defined at the V reference point which is the boundary between the ET and the digital access section or link. These interfaces are designated interface V and are defined to allow flexibility of implementation for different exchange and transmission equipment realizations. However, a physical interface will not be specified for all subscriber access types identified. See Figure 1/Q.512. ÁHÁIn this Recommendation, a digital section is defined as the whole of the means of digital transmission of a digital signal of specified rate between two consecutive reference points. A digital link comprises one or more digital sections and may include either a multiplexer or concentrator, but not switching. ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ°ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀIÁFIGURE 1/Q.512ƒ ÁàÀPÁƒ ÁàÀ9ÁÃÃIllustration of possible access configurationsÄă ÁàÀPÁƒ ÃÃNote 1ÄÄ © Not all interfaces will necessarily exist in every implementation. ÃÃNote 2ÄÄ © The characteristics of a digital transmission system on metallic local lines for ISDN basic rate access which may form part of the basic access digital section are defined in Recommendation I.AB. ÃÃNote 3ÄÄ © The differences among V2, V3, and V4 are essentially multiplexing and signalling requirements. The transmission requirements are substantially identical (e.g. Recommendations G.703, G.704 and G.705). ÃÃNote 4ÄÄ © User©network interface. In the case of ISDN primary rate access this is at the T reference point. ÃÃNote 5ÄÄ © Interface T is defined in Recommendation I.411. ÃÃNote 6ÄÄ © Interface V5 as defined in the Red Book is now being considered as a particular application of the V2 or V3 interface. Interface V4 is now considered for ISDN applications only. ÁàÀJÁTABLE 1/Q.512ƒ ÁàÀPÁƒ ÁàÀFÁÃÃInterface referencesÄă À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À Access À À Interface/ À À À À Related À À Related OAM À À Application À À À À type À À reference À À Section À À physical À À Recs. À À to connect: À À À À À À points À À À À Recs. À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À À À À À À À À À À À ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ8` ÐpÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐÀ ÀBasic À À À À À À À À À À À À À Àaccess À À VÃÃ1ÄÄ À À 3.2 À À Note 1 À À ÃÃI.AAÄÄ ÃÃ1ÄÄ À ÀISDN basic access À À À Àdigital À À À À À À À À I.603 À À(2B + 0) À À À Àsection À À À À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À À À À À À À À À À À À ÀGeneric À À VÃÃ2ÄÄ À À 3.3 À À À À None À ÀDigital network À À À Àdigital À À À À À À À À À Àequipment, sup© À À À Àsection À À À À À À À À À Àporting any com© À À À À À À À À À À À À À Àbination of accessÀ À À À À À À À À À À À À Àtypes À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À À À À À À À À À À À À ÀGeneric À À À À À À À À À ÀDigital subscriberÀ À À Àsub© À À À À À À À À À Àequipment À À À Àscriber À À À À À À G.703 À À ÃÃÀÀÄÄ À À À À À ÀaccessÃÃ2ÄÄ À À VÃÃ3ÄÄ À À 3.4 À À G.704 À À G.706ÃÃÀ$À3ÄÄ À À À À À Àdigital À À À À À À G.705 À À I.604ÃÃÀ ÀÄÄ À À À À À Àsection À À À À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À À À À À À À À À À À À ÀDigital À À À À À À À À À À À À À Àaccess À À À À À À À À À À À À À Àlink À À VÃÃ4ÄÄ À À 3.5 À À À À G.706 À ÀA multiple of ISDNÀ À À À(Static À À À À À À À À I.605 À Àbasic accesses À À À Àmulti© À À À À À À À À À À À À À Àplex) À À À À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À À À À À À À À À À À À ÀGeneric À À À À À À À À À À À À À Àanalogue À À À À À À À À À À À À À Àsub© À À Z À À 4.1 À À NoneÃÃ4ÄÄ À À None À ÀAnalogue sub© À À À Àscriber À À À À À À À À À Àscriber lines À À À Àaccess À À À À À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ ÃÃ1ÄÄ  Recommendation I.AB specifies the characteristics of a digital transmission    system on metallic local lines which may form part of the basic access    digital selection. ÃÃ2ÄÄ  In the case of ISDN access this is the primary rate access digital section. ÃÃ3ÄÄ  Only in the case of ISDN application, G.706 and I.604 are recommended. ÃÃ4ÄÄ  Characteristics other than those defined in Recommendations Q.551©Q.554 are    not subject of CCITT Recommendation. ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH øÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐ 3.ÁHÁÃÃCharacteristics of digital exchange interfaces for subscriber accessÄÄ 3.1ÁHÁÃÃGeneralÄÄ ÁHÁAs an objective, the characteristics of digital interfaces on the subscriber side of the exchange should be aligned with the characteristics of ISDN user/network access structures (Recommendation I.411). ÁHÁHowever in many countries, digital access arrangements not structured according to ISDN principles are used, e.g. to ensure compatibility with existing networks and services and it is expected that these arrangements will continue to be used for several years. Only certain characteristics of these arrangements are the subject of CCITT Recommendations. 3.2 ÁHÁÃÃInterface V1ÄÄ 3.2.1 ÃÃGeneralÄÄ ÁHÁInterface V1 may be used at the V1 reference point to connect to an ISDN basic access digital section for the provision of a single basic access. The characteristics of the basic access digital section are defined in Recommendation ÃÃI.AAÄÄ and the characteristics and parameters of a digital transmission system which may form part of the digital section for the ISDN basic rate access are given in Recommendation ÃÃI.ABÄÄ. 3.2.2 ÃÃFunctional characteristicsÄÄ ÁHÁThe functional description is illustrated in Figure 2/Q.512 and the following functional requirements are defined: ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH ø˜ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐ1)ÁHÁÃÃ(2B + D) ChannelsÄÄ ÁHÁTo provide the bidirectional transmission capability for two B Channels and one 16 kbit/s D Channel as described in Recommendation I.412. 2)ÁHÁÃÃBit timingÄÄ ÁHÁTo provide bit (signal element) timing to enable the digital section to recover information from the aggregate bit stream. 3)ÁHÁÃÃFrame timingÄÄ ÁHÁTo provide frame timing to enable digital section and ET to recover the time division multiplexed channels. 4)ÁHÁÃÃCV1 ChannelÄÄ ÁHÁThe CV1 Channel provides, for each direction of transmission, the capability to transfer management functions required for the digital section as specified in Recommendations ÃÃI.AAÄÄ and I.603. The CV1 Channel may carry one or more functional links. These functions include activation from network side, activation request from a digital section, deactivation from ET side, operation and maintenance signals. 5)ÁHÁÃÃPower feedÄÄ ÁHÁThis function provides for remote power feeding for the digital section and possibly terminal equipment. This function is optional. Ô w.ÔŒ 3.2.3ÁHÁÃÃElectrical CharacteristicsÄÄ ÁHÁThe electrical characteristics of interface V1 are not subject to CCITT Recommendations. 3.2.4 ÃÃChannel types, channel allocation and signallingÄÄ ÁHÁThe channel types associated with interface V1 include two B Channels and one D Channel as defined at the user network interface in Recommendation I.412. In addition, the CV1 Channel is required to support the operational and maintenance functions. ÁHÁThe channel allocation is not subject to CCITT Recommendations. ÁHÁThe D Channel signalling procedures are defined in the Q.920 and Q.930©Series Recommendations. 3.3ÁHÁÃÃInterface V2ÄÄ 3.3.1ÁHÁÃÃGeneralÄÄ ÁHÁInterface V2 is a generic digital interface used to connect remote or local digital network equipment via a first or second order digital section. This network equipment may support any combination of analogue, digital and ISDN subscriber access. The characteristics of this interface may not be structured according to the ISDN principles. 3.3.2ÁHÁÃÃFunctional characteristicsÄÄ ÁHÁThe functional characteristics depend on the specific application of the V2 interface. These are not generally subject to CCITT Recommendations. 3.3.3ÁHÁÃÃElectrical characteristicsÄÄ ÁHÁThe electric characteristics of interface V2 are described in Recommendation G.703. ÁHÁThe basic frame structure at interface V2 should be identical to that of the first or second order rate multiplexes described in Recommendations G.704 and G.705. 3.3.4ÁHÁÃÃChannel types, channel allocation and signallingÄÄ ÁHÁThe channel types, channel allocation and signalling depends on the specific application of the V2 interface. These are not generally subject to CCITT Recommendations. 3.4ÁHÁÃÃInterface V3ÄÄ 3.4.1ÁHÁÃÃGeneralÄÄ ÁHÁInterface V3 is a digital interface used to connect digital subscriber equipment (e.g. PABX) via a generic digital subscriber section. The characteristics of this interface may not be structured according to the ISDN principles. In this case, only the electrical characteristics defined in section 3.4.2 are recommended. However, in the case of ISDN where interface V3 is used to connect a primary rate access digital section for the provision of a single primary rate access, all of the following characteristics apply. 3.4.2ÁHÁÃÃFunctional characteristicsÄÄ ÁHÁThe use of the Cyclic Redundancy Check (CRC) procedures described in Recommendations G.704 and G.706 is recommended. The information on the status of the CRC processing shall be passed across the V3 interface. The maintenance procedures are defined in Recommendation I.604. 3.4.3ÁHÁÃÃElectrical characteristicsÄÄ ÁHÁThe electrical characteristics of interface V3 are described in Recommendation G.703. ÁHÁThe frame structure at interface V3 should be identical to that described in Recommendations G.704 and G.705. 3.4.4ÁHÁÃÃChannel types, channel allocation and signallingÄÄ ÁHÁThe channel types and allocation associated with interface V3 are 30 B + 1 D at 2048 kbit/s or 23 B + 1 D at 1544 kbit/s as described in Recommendation I.431. ÁHÁThe channel allocation should also consider that: ÁHÁa)Âh   Âwhen the signalling for the B Channels in one primary rate structure is carried by the D Channel in another primary rate structure, the Channel timeslot normally used for signalling may be used to provide an additional B Channel;ÆÆ ÁHÁb)Âh   Âat interface V3 the designated number of B Channels is always present within the multiplexed channel structure, but one or more of the B Channels may not be used in any given application.ÆÆ ÁHÁThe D Channel signalling procedures are defined in the Q.920 and Q.930 Series Recommendations. 3.5ÁHÁÃÃInterface V4ÄÄ 3.5.1ÁHÁÃÃGeneralÄÄ ÁHÁInterface V4 is a digital interface used to connect a digital access link which includes a static multiplexer supporting several basic access digital sections. The local digital multiplexer application is considered to be a subset of the remote digital multiplexer application. 3.5.2ÁHÁÃÃFunctional characteristicsÄÄ ÁHÁThe functional description is illustrated in Figure 3/Q.512 and the following functional requirements are defined: ÁHÁ©Âà  Âm x (2B + D) + CV1: to provide the bidirectional transmission capability for the B, and D, CV1 Channels from each basic rate access section;ÆÆ ÁHÁ©Âà  ÂTiming: to provide the necessary timing information for bitÔ w.Ô transmission, frame synchronization and subscriber line synchronization;ÆÆ ÁHÁ©Âà  ÂOperations and maintenance: to provide the transmission capability to carry the operation and maintenance signals of the digital link and the basic access muldex as defined in I.605.ÆÆ ÁHÁThe use of the Cyclic Redundancy Check (CRC) procedures described in Recommendations G.704 and G.706 are recommended. The information on the status of the CRC processing shall be passed across the V4 interface. 3.5.3ÁHÁÃÃElectrical characteristicsÄÄ ÁHÁThe electrical characteristics of interface V4 are described in Recommendation G.703. ÁHÁThe basic frame structure at interface V4 should be identical to that of the first order multiplexes described in Recommendations G.704 and G.705. 3.5.4ÁHÁÃÃChannel types, channel allocation and signallingÄÄ ÁHÁThe V4 interface is composed of a number of individual ISDN basic rate access digital sections, as described in section 3.2. ÁHÁThe channel allocation at interface V6 is defined within a first order structure using a static multiplexing principle as follows: 3.5.4.2Á  ÁStatic multiplexed at 2048 kbit/s 3.5.4.2.1  Channel Allocation ÁHÁIn this case 12 basic access channels are multiplexed in a static manner using fixed allocation of the channels. Figure 4/Q.512 illustrates the channel allocation for 2048 kbit/s, where 24 channel timeslots are used by B1 and B2 Channels and 6 channel timeslots are used by the D and CV1 Channels of the 12 basic accesses. ÁHÁThe CV1 and D Channels of two basic accesses are multiplexed into one channel timeslot. Five contiguous channel timeslots are occupied by two basic accesses each consisting of B1 + B2 + D + CV1 Channels. ÁHÁChannel timeslot 0 is used for frame alignment including the application of CRC4 according to Recommendation G.704. Additionally, the alarm handling facilities of channel timeslot 0 are used for maintenance of the primary link as described in Recommendation I.605. ÁHÁAccording to the channel allocation shown in Figure 4/Q.512, the CV1 Channels are located in timeslots 5, 10, 15, 21, 26 and 31. These represent 8 bits, namely two bits for each of the D and CV1 channels of two basic accesses. 3.5.4.2.2  CV1 Channel Structure ÁHÁTo facilitate separate treatment of bundles of two basic accesses, represented by five 64 kbit/s channels, multi©frame alignment should be performed individually for each bundle. The relevant overhead information should be contained in the CV1 channels. CV Channel structure is for further study. ÁHÁThe D Channel signalling procedures are defined in the Q.920 and Q.930©Series Recommendations. 3.5.4.3Á  ÁStatic multiplexed 1544 kbit/s ÁHÁFor further study. ÁàÀPÁƒ ÁàÀPÁƒ ÁàÀIÁFIGURE 3/Q.512ƒ ÁàÀPÁƒ ÁàÀ=ÁÃÃFunctional description of V4 interfaceÄă ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH øÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐÁHÁÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À ÁHÁÀ À Channel  À À                                À À ÁHÁÀ À Timeslot  À À                 Contents À À ÁHÁÀ À No. À À À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ ÁHÁÀ ÀÁ  Á0Á øÁÀ À Frame alignment signal/Remote service alarm À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ indication. See Recommendation G.704 À À ÁHÁÀ ÀÁ  Á1Á øÁÀ À B1,1 À À ÁHÁÀ ÀÁ  Á2Á øÁÀ À B2,1 À À ÁHÁÀ ÀÁ  Á3Á øÁÀ À B1,2 À À ÁHÁÀ ÀÁ  Á4Á øÁÀ À B2,2 À À ÁHÁÀ ÀÁ  Á5Á øÁÀ À D1, CVÃÃ1ÄÄ1, D2, CVÃÃ1ÄÄ2 À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ ÀÁ  Á6Á øÁÀ À B1,5 À À ÁHÁÀ ÀÁ  Á7Á øÁÀ À B2,5 À À ÁHÁÀ ÀÁ  Á8Á øÁÀ À B1,6 À À ÁHÁÀ ÀÁ  Á9Á øÁÀ À B2,6 À À ÁHÁÀ À 10ÁøÁÀ À D5, CVÃÃ1ÄÄ5, D6, CVÃÃ1ÄÄ6 À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ À 11ÁøÁÀ À B1,9 À À ÁHÁÀ À 12ÁøÁÀ À B2,9 À À ÁHÁÀ À 13 ÁøÁÀ À B1,10 À À ÁHÁÀ À 14ÁøÁÀ À B2,10 À À ÁHÁÀ À 15ÁøÁÀ À D9, CVÃÃ1ÄÄ9, D10, CVÃÃ1ÄÄ10 À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ À 16ÁøÁÀ À not used À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ À 17ÁøÁÀ À B1,3 À À ÁHÁÀ À 18ÁøÁÀ À B2,3 À À ÁHÁÀ À 19ÁøÁÀ À B1,4 À À ÁHÁÀ À 20ÁøÁÀ À B2,4 À À ÁHÁÀ À 21ÁøÁÀ À D3, CVÃÃ1ÄÄ3, D4, CVÃÃ1ÄÄ4 À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ À 22 ÁøÁÀ À B1,7 À À ÁHÁÀ À 23ÁøÁÀ À B2,7 À À ÁHÁÀ À 24ÁøÁÀ À B1,8 À À ÁHÁÀ À 25ÁøÁÀ À B2,8 À À ÁHÁÀ À 26ÁøÁÀ À D7, CVÃÃ1ÄÄ7, D8, CVÃÃ1ÄÄ8 À À ÁHÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÁHÁÀ À 27ÁøÁÀ À B1,11 À À ÁHÁÀ À 28ÁøÁÀ À B2,11 À À ÁHÁÀ À 29ÁøÁÀ À B1,12 À À ÁHÁÀ À 30ÁøÁÀ À B2,12 À À ÁHÁÀ À 31ÁøÁÀ À D11, CVÃÃ1ÄÄ11, D12, CVÃÃ1ÄÄ12 À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À B1,i = B1 channel of basic access i B2,i = B2 channel of basic access i Di = D channel of basic access i CVÃÃ1ÄÄi = Control CVÃÃ1ÄÄ channel of basic access i ÁàÀIÁFIGURE 4/Q.512ƒ ÁàÀPÁƒ ÁàÀ5ÁÃÃChannel allocation at the V4 interface for 2048 kbit/sÄă ÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH ø˜ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐ 4.ÁHÁÃÃCharacteristics of analogue exchange interface for subscriber accessÄÄ 4.1ÁHÁÃÃInterface ZÄÄ ÁHÁInterface Z is a generic analogue interface defined at the exchange side of an analogue subscriber line used to connect subscriber equipment (e.g. single telephone set or PABX). ÁHÁIt is recognized that the characteristics of analogue interfaces (generally designated Z interface) vary considerably from country to country and therefore it is not intended that those interfaces be the subject of CCITT Recommendations beyond those aspects covered in Recommendations Q.551/552. 5.ÁHÁÃÃCombined digital and analogue interface for subscriber accessÄÄ ÁHÁIn the evolution towards an ISDN, user network accesses may exist which have a combination of both analogue and digital interfaces. ÁHÁThis type of interface is not presently considered to be a matter for CCITT Recommendations.