ÿWPCL ûÿ2BJ|xÐ ` ÐÐÌÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿH øÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÌÐÐ °°°è ÐÑ Âx„|ü@Ž ÑÐ Å@8Ø'@8Ø'Å Ð Õ[Ï Ð ` Ð Áà@Á©  ©ƒ Áà;ÁCOM XI©R 74©Eƒ ÁàAÁƒ[ÕÕ[Ï Ð ` Ð Áà@Á©  ©ƒ Áà;ÁCOM XI©R 74©Eƒ ÁàAÁƒ[ÕÐ °èè Ð1.1.2ÂðHÂÓÓÃÃDraft Recommendation Q.50ÄÄÆÆ Áà"ÁSIGNALLING BETWEEN CIRCUIT MULTIPLICATION EQUIPMENTS (CME) ANDƒ Áà/ÁINTERNATIONAL SWITCHING CENTRES (ISC)ƒ 1.ÂXHÂÃÃIntroductionÄÄÆÆ Ð ° ÐÁHÁThis Recommendation contains principles and examples of signalling between ISC (exchanges) and their associated circuit multiplication equipments. (In call modification is for further study.) ÁHÁCircuit multiplication equipments may have integral echo control and A/u law converter functions. Ð H ÐÁHÁThe information in this Recommendation is compatible with the control procedures for such devices. 2.ÂXHÂÃÃDefinitions relating to CMEÄÄÆÆ 2.1ÂàHÂÃÃDigital circuit multiplication equipment (DCME) and CMEÄÄÆÆ ÁHÁDCME and CME constitute a general class of equipment which permits concentration of a number of trunks on a reduced number of transmission channels. DCME in particular permits concentration of a number of 64 kbit/s PCM encoded trunks on a reduced number of digital transmission channels. 2.2ÂàHÂÃÃSpeech interpolation; digital speech interpolation (DSI)ÄÄÆÆ ÁHÁA method of profiting from the time instants when a speaker is not active, which is indicated by a speech detector. The channel is then used by another speaker. The signals carried by a transmission channel therefore represent interleaved bursts of speech signals derived from a number of different trunks. 2.3ÂàHÂÃÃLow rate encoding (LRE)ÄÄÆÆ ÁHÁSpeech coding methods with bit rates less than 64 kbit/s, e.g. the 32 kbit/s transcoding process defined in G.721 applied to speech coded according to G.711. 2.4ÂàHÂÃÃSpeech activityÄÄÆÆ ÁHÁThe ratio of the time speech and corresponding hangover occupies the trunk to the total measuring time, averaged over the total number of trunks carrying speech. 2.5ÂàHÂÃÃCME gainÄÄÆÆ ÁHÁThe trunk channel to transmission channel multiplication ratio, which is achieved through application of CME, including LRE and/or speech interpolation (DSI). ÁàHHÁFIGURE 1/Q.50ƒ ÁàHNÁƒ ÁàHJÁÃÃCME gainÄă ÃÃNoteÄÄ © For a complete discription of bearer channels, see Recommendation G.dcme. 2.6ÂàHÂÃÃTrunkÄÄÆÆ ÁHÁA bidirectional connection consisting of a forward channel and a backward channel between the ISC and CME not subject to LRE or DSI operation. 2.7ÂàHÂÃÃTransmission channel © bearer channelÄÄÆÆ ÁHÁOne channel of the connection between the transmit unit and receive unit of corresponding CME. 2.8ÂàHÂÃÃFreeze©outÄÄÆÆ ÁHÁThe condition when a trunk channel becomes active and cannot immediately be assigned to a transmission channel, due to lack of available transmission capacity. 2.9ÂàHÂÃÃFreeze©out fractionÄÄÆÆ ÁHÁThe ratio of the sum of the individual channel freeze©outs to the sum of the active signals and their corresponding hangover times and front end delays, for all trunk channels over a fixed interval of time, e.g. one minute. 2.10ÂhHÂÃÃTransmission overloadÄÄÆÆ ÁHÁThe condition when the freeze©out fraction or average bits per sample goes beyond the value set in accordance with speech quality requirements. 2.11ÂhHÂÃÃOperating modesÄÄÆÆ ÂHHÂÁ€Á2.11.1Á  ÁÃÃPoint©to©point modeÄÄ (see Figures 2a/Q.50 and 2b/Q.50)ÆÆ ÁHÁPoint©to©point © Using Figure 2a/Q.50 for reference, the transmit side CME concentrates N trunks into N/G transmission channels, where G is the CME gain. ÁHÁAt the receive side, the receiving CME simply reconstitutes the N trunks from the N/G transmission channels. ÁàHGÁFIGURE 2a/Q.50ƒ ÁàHNÁƒ ÁàH@ÁÃÃPoint©to©point unidirectionalÄă ÁàHGÁFIGURE 2b/Q.50ƒ ÁàHNÁƒ ÁàH:ÁÃÃPoint©to©point two origins unidirectionalÄă ÁàHHÁFIGURE 2/Q.50ƒ ÁàHNÁƒ ÁàH.ÁÃÃMulti©clique for two origins and two destinations unidirectionalÄă ÁàHNÁƒ ÁHÁThe example in Figure 2b/Q.50 also shows a point©to©point mode. From the switching point of view there could be a difference between the configurations in Figures 2a/Q.50 and 2b/Q.50. ÁHÁFor transmission of alarms it has also to be considered, that different exchanges may be connected to one CME. ÂHHÂÁ€Á2.11.2Á  ÁÃÃMulti©clique modeÄÄ (see Figure 3/Q.50)ÆÆ ÁHÁMulti©clique mode © in this mode the pool of transmission channels is sub©divided into several independent pools (cliques) or fixed capactiy, each being for an individual destination. If a part of the cliques capacity is not used, it cannot be used for another destination. ÁàHHÁFIGURE 3/Q.50ƒ ÁàHNÁƒ ÁàH8ÁÃÃMulti©clique mode (only one direction shown)Äă ÁàHNÁƒ ÂHHÂÁ€Á2.11.3Á  ÁÃÃMulti©destination modeÄÄÆÆ ÁHÁA DCME operational mode where input trunk channel traffic is interpolated over a pool of available transmission channels for all destinations having traffic in the pool. The transmit trunk channels are designated to receive trunk channels at corresponding locations. ÁHÁFigure 4/Q.50 shows a unidirectional system block diagram for a multi© destination mode with two transmit and two receive DCME units. ÁàHHÁFIGURE 4/Q.50ƒ ÁàHNÁƒ ÁàH6ÁÃÃMulti©destination mode (only one direction shown)Äă 3.ÂXHÂÃÃRequirements for controlÄÄÆÆ 3.1ÂàHÂÃÃReasons for use of circuit multiplication equipments (CME)ÄÄÆÆ ÁHÁCircuit multiplication equipments are used in order to reduce the 3.2ÂàHÂÃÃIntegration of CMEs into the telephone networkÄÄÆÆ ÁHÁNormally, when an exchange needs an outgoing circuit, the only question is whether or not a circuit is available. In this example, the call may be blocked if all of the circuits are unavailable through traffic or maintenance. If the same call encounters a CME, the possible outcomes are more complex. Ð   ÐÂHHÂÂX  Â(and for 3.1 kHz audio, if appropriate) through DSI systems (i.e., not through internal pre©assignment), the establishment and disestablishment of connections between the CMEs have to be initiated from the outgoing exchange.ÆÆ Ð ` Ð 3.3ÂàHÂÃÃFactors for signalling functions determinationÄÄÆÆ Ð H ÐÁHÁThe functional requirements for signalling between CMEs and exchanges are determined by the type of CME with its capabilities and limitations, and by the types of bearer services it supports. ÁHÁThe remote control of echo control devices and A/u©law converters, if they are integrated into the CME, is accomplished either by the terminal or test equipment or directly from the ISC (based on call set up information/signalling information). ÁHÁRequirements and actions for control of ECD are described in CCITT Recommendation Q.115. 3.3.1ÂðHÂÃÃCircuit multiplication equipment and physical locationÄÄÆÆ ÁHÁThere are different types of CME which are being used or will most likely be used in the international telephone network, each with its own capabilities and limitations: ÂHHÂa)Âh   Â32 kbit/s low rate encoding (LRE);ÆÆ Ð ` Ð ÂHHÂb)Âh   Âanalogue speech interpolation equipment;ÆÆ Ð p ÐÂHHÂc)Âh   Âdigital speech interpolation (DSI) with 64 kbit/s PCM;ÆÆ Ð ` Ð ÂHHÂd)Âh   Âcombined 32 kbit/s LRE and DSIÆÆ ÂHHÂe)Âh   Â16 kbit/s LRE.ÆÆ Ð  ÐÁHÁThe location of certain types of CME relative to the exchange determines the choice of signalling interface. These CMEs can be located at the ISC or remote from the ISC (e.g., at an earth station). Certain types of signalling interfaces may be more practical when these CMEs are co©located with the ISC, and others may be more practical when they are remote from the ISC. Therefore, the location of the CME needs to be considered when choosing the signalling between ISC and CME. Ð H ÐÁHÁWhen the CME is remote from the ISC, the link between the ISC and CME could be composed of digital or analogue transmission path. Both conditions have different equipment configurations and different signalling requirements (see section 7). 3.3.2ÂðHÂÃÃBearer services supported on CME linksÄÄÆÆ ÁHÁUp to four basic bearer service types are supported or will likely be supported by CMEs in the international network: Ð  ÐÂHH©Âà  Âspeech bearer service (full duplex, analogue or digital);ÆÆ Ð ` Ð ÂHH©Âà  Â3.1 kHz audio bearer service (full duplex);ÆÆ ÂHH©Âà  Â64 kbit/s unrestricted bearer service (full duplex);ÆÆ Ð ( ÐÂHH©Âà  Âalternate speech/64 kbit/s unrestricted bearer service (full duplex);ÆÆ Ð ` Ð Áà;ÁTABLE 1/Q.50ƒ ÁàAÁƒ Ð   ÐÁàà%ÁÃÃBearer services supported in CMEs in relation to CME©exchange signallingÄă 4.ÂXHÂÃÃBearer services and CME techniques in the context of signallingÄÄÆÆ Ð X ÐÁHÁTable 1/Q.50 gives the relationship between CME techniques and the four bearer services identified in ÀÀ 3.3.2 with regard to their supportability and the need for CME©exchange message transfer. ÁHÁThe signalling function requirements are categorized on the basis of bearer services supported by the different CME techniques. For speech bearer services, only transmission resource management (TRM) information alone is adequate especially for CMEs employing speech interpolation. The objective of this provision is to maintain the reduction of transmission quality within tolerable limits. In addition to TRM information, external call set©up message (CSM) exchange is needed for bearer services involving on©demand 64 kbit/s unrestricted service in contemporary digital circuit multiplication equipment (32 kbit/s LRE and DSI). 5.ÂXHÂÃÃDivision of functionality between the exchange and the CMEÄÄÆÆ 5.1ÂàHÂÃÃCME dynamic load control processÄÄÆÆ ÁHÁTRM information is based on traffic load measurements at the local and distant CMEs. Therefore in the multi©destination and multi©clique mode of operation, TRM information is provided for each destination/clique separately. ÁHÁA universal arrangement is proposed for handling transmission resource management (TRM) information between CME and an exchange. The TRM information is dynamically presented to the exchange in one of two states for each bearer service. The states are called "available" and "not available". Logic within the CME is used to determine which of the two states should be indicated to the exchange regardless of any condition at the exchange. ÁHÁWhen a CME encounters a "not available" state for a bearer service (either locally or remotely), it presents this indication to the exchange so it will stop routing new calls to the CME for that bearer service even if there are free, unseized circuits available. The exchange will continue to prohibit calls to the CME until it receives an "available" indication for the bearer service which will be sent by the CME when both, locally and remotely, there is no overload. ÁHÁThis DLC information is therefore directly influencing the circuit selection process in the exchange during call set©up for each bearer service separately. ÁHÁThe circuit selection in the exchange is a check whether or not a free unseized circuit is suitable for a certain bearer service type, for which a new call is to be accommodated. For example, the exchange would select a free circuit for a speech call if "speech capacity available" is indicated, irrespective of the indications for other bearer service types. If the DCME link is unable to accommodate additional new 64 kbit/s calls, all free unseized circuits within the exchange will be marked accordingly. Even though the generation of bearer service related TRM information with DCMEs may be in part mutually dependent (i.e., no capacity for speech implies no capacity for any other bearer service types but not necessarily vice©versa), separate signalling and processing for each bearer service type are necessary to allow different future CMEs to develop independently. 5.2ÂàHÂÃÃCall set©up processÄÄÆÆ ÁHÁAccording to Table 1/Q.50, the contemporary digital circuit multiplication equipment, having the capability to support on©demand all four identified bearer services, in addition to providing TRM to the exchange, requires call set©up messages (CSM) (from the exchange) for selecting bearer services. ÁHÁFor the 64 kbit/s unrestricted bearer service, a circuit is selected if "unrestricted capacity available" is indicated, and a CSM in the form of Seizure/Select request is forwarded to the DCME. An acknowledgement (positive or negative) is set as soon as possible even if capacity is available, to account for possible call set©up rejects other than due to capacity limitations on the DCME link. ÁHÁThe positive acknowledgement will be used by the ISC to initiate the interexchange signalling to the next ISC (e.g. transmission of the IAM of Signalling System No. 7). A failure to establish a 64 kbit/s circuit between CMEs must be reported to the DSG as soon as the condition has been identified by the CME to the ISG by using an out©of©service message. ÁHÁThe out©of©service message is considered by the ISC to be equivalent to the alarm signal defined in Recommendation Q.33. The ISC will take release actions (if appropriate) as specified in Recommendation Q.33, ÀÀ 4. ÁHÁThe released 64 kbit/s message from the ISC will be positively acknowledged after proper completion of the DCME circuit disestablishment process. Failure to complete this process shall be notified to the ISC using an ÃÃout©of©serviceÄÄ message and the DCME will put the circuit in a blocked condition. After the failure condition is removed, this circuit will be in idle condition and a ÃÃback©in©serviceÄÄ message shall be sent to the ISC. ÁHÁUnder a 64 kbit/s unrestricted dual seizure situation, the non© controlling ISC will initiate a release of the DCME connection using procedures defined in the appropriate inter ISC signalling system protocol. If the DCME is unable to re©establish a remotely released 64 kbit/s duplex connection, it shall indicate this abnormal situation to the appropriate ISC by out©of© service. ÁHÁThe information elements and procedures necessary to support the alternate 64 kbit/s speech bearer services are for further study. ÁàÀJÁFIGURE 5/Q.50ƒ ÁàÀPÁƒ ÁàÀ@ÁÃÃTypical ISC/CME information flowsÄă ÁàÀPÁƒ 5.3ÂàHÂÃÃInter©dependency between dynamic load control and call set©up processÄÄÆÆ ÁHÁTo allow a standard method of interworking with inter©exchange signalling systems it is important to adopt the functional interdependency between TRM and CSM as described above. 6.ÂXHÂÃÃControl information elements between exchange and CMEÄÄÆÆ ÁHÁThe amount of control information elements utilized between the exchange and the CME depends on the capabilities of the CME and the exchange. Two categories of CME signalling capabilities are recognized. The first category of CME (Type 1) is capable of only transmitting signals from the CME to the exchange (e.g. DLC see Table 3/Q.50). The second category of CME (Type 2) is able to transmit and receive signals to/from the exchange. Tables 2/Q.50, 3/Q.50 and 4/Q.50 give a set of information elements and their flow on the control link between the exchange and the CME for the second category of CME. 6.1ÂàHÂÃÃInformation elements for Type 1 CMEÄÄÆÆ ÁHÁType 1 CME only should use the following information elements (m = mandatory; o = optional). ÁàÀ4ÁÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ Àƒ ÁàÀ4ÁÀ À À À À Àƒ ÁàÀ9ÁÀ À    Type of information elements    À À Used (m) or (o) À Àƒ ÁàÀ4ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ4ÁÀ À À À À Àƒ ÁàÀ6ÁÀ À1. No capacity for speech available À À   (m) Note a À Àƒ ÁàÀ4ÁÀ À À À À Àƒ ÁàÀ7ÁÀ À2. Channel(s) available for speech  À À   (m) Note a À Àƒ ÁàÀ4ÁÀ À À À À Àƒ ÁàÀ?ÁÀ À3. Out©of©service                   À À   (o) À Àƒ ÁàÀ4ÁÀ À À À À Àƒ ÁàÀ?ÁÀ À4. Back©in©service                  À À   (o) À Àƒ ÁàÀ4ÁÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ Àƒ ÁàÀPÁƒ ÁàÀ=ÁÃÃNote aÄÄ © Speech includes 3.1 kHz audio.ƒ ÁàÀJÁTABLE 2/Q.50ƒ ÁàÀ4ÁÃÃInformation elements for transmission resource managementÄă ÁàÀAÁÃÃ(load control) CME/ISC (Type 2)Äă À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÀType of informationÀ À        Notes             À ÀDirection ofÀ À Procedures; Use À À À À element (Note a)  À À                          À À   the      À À     of the À À À À                   À À                          À Àinformation À À   information À À À À                   À À                          À À  element   À À    elements À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.1 No capacity    À À No bearer capacity       À À CME©©>ISC À À À À À Àm   for speech     À À for additional trunk(s) À À À À À À À À    available      À À available À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.2 Channel(s)     À À This information element À À CME©©>ISC À À À À À Àm   available for  À À is sent to notify the À À À À À À À À    speech         À À end of "No capacity for À À À À À À À À                   À À speech available" À À À À À À À À                   À À condition À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.3 No trunk(s)    À À No bearer capacity for   À À CME©©>ISC À À À À À Ào   available for  À À additional 3.1 kHz audio À À À À À À À À    3.1 kHz audio  À À trunk(s) available À À À À À À À À    Note 1 À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.4 Trunk(s)       À À This information element À À CME©©>ISC À À À À À Ào  available for   À À is sent to notify the À À À À À À À À   3.1 kHz         À À end of "No trunk À À À À À À À À   Note 1          À À available for 3.1 kHz À À À À À À À À                   À À audio" condition À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.5 No 64 kbit/s   À À No bearer capacity for   À À CME©©>ISC À À À À À Àm   capacity       À À additional 64 kbit/s À À À À À À À À    available      À À trunk(s) available À À À À À À À À    Note 2 À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.6 AcknowledgementÀ À                          À À ISC©©>CME À À À À À Ào   of "No 64 À À À À À À À À À À    kbit/s capacityÀ À À À À À À À À À    available" À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.7 Trunk(s)       À À This information element À À CME©©>ISC À À À À À Àm   available for  À À is sent to notify the endÀ À À À À À À À    64 kbit/s      À À of "No 64 kbit/s capacityÀ À À À À À À À                   À À available" overload À À À À À À À À                   À À condition À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À1.8 AcknowledgementÀ À                          À À ISC©©>CME À À À À À Ào   of trunk(s) À À À À À À À À À À    available for À À À À À À À À À À    64 kbit/s À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À ÃÃNote aÄÄ © Each information element may be sent as a message or may be implicit by the lack of a signal (e.g. the CME may send a signal for no capacity for speech available and remove the same signal to indicate trunks available for speech). m = mandatory for this type of CME o = optional for this type of CME ÁàÀJÁTABLE 3/Q.50ƒ ÁàÀPÁƒ ÁàÀ3ÁÃÃInformation elements for seizure/release (CME/ISC (Type 2))Äă À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÀType of information À À       Notes             À ÀDirection ofÀ À Procedures; use À À À À  elements       À À                         À À   the      À À     of the À À À À                    À À                         À Àinformation À À   information À À À À                    À À                         À À  element   À À    elements À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.1  64 kbit/s      À ÀSent when 64 kbit/s      À À ISC©©>CME À À À À À Àm    select/        À Àcircuit is required via À À À À À À À À     seizure        À Àthe DCME (Note 3) À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.2  Trunk          À ÀExplicit or implicit     À À ISC©©>CME À À À À À Àm    identity       À Àinformation to assign an À À À À À À À À                    À Àinformation element to a À À À À À À À À                    À Àspecific trunk À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.3  64 kbit/s pos. À ÀSent if 64 kbit/s requestÀ À CME©©>ISC À À À À À Àm    Acknowlegement À Àcan be satisfied À À À À À À À À                    À À(Note 4) À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.4  64 kbit/s NACK À ÀSent if a 64 kbit/s      À À CME©©>ISC À À À À À Àm                   À Àrequest cannot be À À À À À À À À                    À Àsatisfied À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.5  Release        À ÀSent by the originating  À À ISC©©>CME À À À À À Àm    64 kbit/s      À ÀISC to indicate that a À À À À À À À À                    À À64 kbit/s circuit is not À À À À À À À À                    À Àrequired any longer À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.6  3.1 kHz        À ÀRequest to allocate data À À ISC©©>CME À À À À À Ào    service/select À Àoptimized facilities À À À À À À À À     seizure À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.7  3.1 kHz        À ÀSent if 3.1 kHz service  À À CME©©>ISC À À À À À Ào    service, pos.  À Àrequest can be satisfied À À À À À À À À     AcknowledgementÀ À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.8  3.1 kHz        À ÀSent if 3.1 kHz service  À À CME©©>ISC À À À À À Ào    service/NACK   À Àrequest cannot be À À À À À À À À                    À Àsatisfied À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.9  Release        À ÀSent to indicate         À À ISC©©>CME À À À À À Ào    3.1 kHz        À Àtermination of the call À À À À À À À À     service À À À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À ÀType of information À À       Notes             À ÀDirection ofÀ À Procedures; use À À À À  elements       À À                         À À   the      À À     of the À À À À                    À À                         À Àinformation À À   information À À À À                    À À                         À À  element   À À    elements À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.10 Speech service À ÀSent to indicate speech  À À ISC©©>CME À À À À À Ào    select/seizure À Àservice request À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.11 Speech, pos.   À ÀSent if speech request   À À CME©©>ISC À À À À À Ào    AcknowledgementÀ Àcan be satisfied À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À À À2.12 Speech NACK    À ÀSent if speech request   À À CME©©>ISC À À À À À Ào                   À Àcannot be satisfied À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.13 Release speech À ÀSent to indicate that theÀ À ISC©©>CME À À À À À Ào                   À Àspeech circuit is not À À À À À À À À                    À Àrequired any longer      À À            À À      Note 5 À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À À2.14 Release        À ÀSent to indicate         À À CME©©>ISC À À À À À Àm    64 kbit/s pos. À Àsuccessful completion À À À À À À À À     AcknowledgementÀ Àof Release À À À À À À À ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ À ÁàÀJÁTABLE 4/Q.50ƒ ÁàÀPÁƒ ÁàÀ6ÁÃÃInformation elements for maintenance (CME/ISC) Type 2Äă ÁàÀ2ÁÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ Àƒ ÁàÀ;ÁÀ ÀType of information À À       Notes             À ÀDirection ofÀ Àƒ ÁàÀFÁÀ À  elements       À À                         À À   the      À Àƒ ÁàÀHÁÀ À                    À À                         À Àinformation À Àƒ ÁàÀJÁÀ À                    À À                         À À  element   À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ6ÁÀ À3.1 Maintenance     À ÀSent for manual control, À À CME©©>ISC À Àƒ ÁàÀ4ÁÀ Ào   Release Signal  À ÀÃÃplannedÄÄ removal from À À À Àƒ ÁàÀ9ÁÀ À    Note 5          À Àservice À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ8ÁÀ À3.2 Maintenance     À ÀSent to acknowledge      À À ISC©©>CME À Àƒ ÁàÀ8ÁÀ Ào   Release         À Àreception of Maintenance À À À Àƒ ÁàÀ4ÁÀ À    Acknowledgement À ÀRelease, ISC is waiting À À À Àƒ ÁàÀ9ÁÀ À    Note 5          À Àfor the release of the À À À Àƒ ÁàÀ<ÁÀ À                    À Àtrunk À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ7ÁÀ À3.3 CME clear of    À ÀSignal sent when all     À À ISC©©>CME À Àƒ ÁàÀ4ÁÀ Ào   traffic signal  À À(this) trunk(s) are (is) À À À Àƒ ÁàÀ4ÁÀ À    (released after À Àidle. The ISC prevents À À À Àƒ ÁàÀ6ÁÀ À    maintenance     À Ànew seizures on these À À À Àƒ ÁàÀ4ÁÀ À    release signal) À À(this) trunk(s). À À À Àƒ ÁàÀ4ÁÀ À    Note 5 À À À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ8ÁÀ À3.4 Out©of©service  À ÀGeneral CME trunk        À À CME©©>ISC À Àƒ ÁàÀ;ÁÀ Àm                   À Àunavailable signal used À À À Àƒ ÁàÀ<ÁÀ À                    À Àon a per circuit basis À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ4ÁÀ À3.5 Out©of©service  À ÀSent to acknowledge "Out©À À ISC©©>CME À Àƒ ÁàÀ4ÁÀ Ào   acknowledgement À Àof©service signal" used À À À Àƒ ÁàÀ<ÁÀ À                    À Àon a per circuit basis À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ5ÁÀ À3.6 Back©in©service À ÀSent after the removal   À À CME©©>ISC À Àƒ ÁàÀ8ÁÀ Àm   Note 5          À Àfrom service is no À À À Àƒ ÁàÀ<ÁÀ À                    À Àlonger necessary © used À À À Àƒ ÁàÀ<ÁÀ À                    À Àon a per circuit or per À À À Àƒ ÁàÀ<ÁÀ À                    À ÀCME basis À À À Àƒ ÁàÀ2ÁÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀƒ ÁàÀ5ÁÀ À3.7 Acknowledgement À ÀUsed on a per circuit    À À ISC©©>CME À Àƒ ÁàÀ5ÁÀ Ào   of "Back©in©    À Àbasis À À À Àƒ ÁàÀ4ÁÀ À    service" À À À À À Àƒ ÁàÀ2ÁÀ ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ Àƒ ÃÃNotes to Table 2/Q.50ÄÄ ÃÃNote 1ÄÄ © This information may be implicit in information element 1.1 (e.g. because 3.1 kHz audio data and speech may be supported by the same LRE algorithm or 3.1 kHz audio data is detected by the CME using inband signals (2 100 Hz) from the data terminal). ÃÃNote 2ÄÄ © If a defined portion of the bearer capacity is used for special call types (definition of minimum and/or maximum number of channels per call type, e.g. for 3.1 kHz audio or 64 kbit/s), a special load control information is needed for each of these call types. ÃÃNotes to Table 3/Q.50ÄÄ ÃÃNote 3ÄÄ © Preassigned (DNI) 64 kbit/s channels do not need this information element. ÁHÁA 64 kbit/s select/seizure information element between CME and ISC is mandatory for Type 2 CME equipment, if 64 kbit/s channels are used on a demand basis. Also preassigned 64 kbit/s channels (digital non©interpolated (DNI) channels) could be used (e.g. for common channel signalling). ÃÃNote 4ÄÄ © Dependent on the realization of the CME there could be a longer or shorter delay for 64 kbit/s channel acknowledgement. ÁHÁFor common channel signalling it must be ensured that the circuit establishment process between the CME is finished before signalling for this circuit has finished. ÃÃNote 5ÄÄ © The request for speech service may be implicit, that means, that a discrete information flow may not be required. ÁHÁFor indication of termination (not interruption) of a call, select/seizure and release may be necessary on a per call basis. ÃÃNotes to Table 4/Q.50ÄÄ ÃÃNote 5ÄÄ © Information elements 3.1, 3.2, 3.3 and 3.6 are a set of elements that should only be used together. ÁHÁInformation element 3.6 could also be used after "out©of©service" © information without 3.1, 3.2 and 3.3. 7.ÁHÁ