ATM Forum Technical Committee PICS Proforma for the 155 Mb/s over Twisted Pair Cable Physical Medium Dependent Interface af-test-0070.000 November, 1996 Copyright release for PICS: This PICS Proforma may be freely reproduced, so that it may be used for its intended purpose. ----------- PICS Proforma for the 155 Mb/s over Twisted Pair Cable Physical Medium Dependent Interface af-test-0070.000 November, 1996 (C) 1996 The ATM Forum. All Rights Reserved. No part of this publication may be reproduced in any form or by any means. The information in this publication is believed to be accurate as of its publication date. Such information is subject to change without notice and the ATM Forum is not responsible for any errors. The ATM Forum does not assume any responsibility to update or correct any information in this publication. Notwithstanding anything to the contrary, neither The ATM Forum nor the publisher make any representation or warranty, expressed or implied, concerning the completeness, accuracy, or applicability of any information contained in this publication. No liability of any kind shall be assumed by The ATM Forum or the publisher as a result of reliance upon any information contained in this publication. The receipt or any use of this document or its contents does not in any way create by implication otherwise: - Any express or implied license or right to or under any ATM Forum member company's patent, copyright, trademark or trade secret rights which are or may be associated with the ideas, techniques, concepts or expressions contained herein; nor - Any warranty or representation that any ATM Forum member companies will announce any product(s) and/or service(s) related thereto, or if such announcements are made, that such announced product(s) and/or service(s) embody any or all of the ideas, technologies, or concepts contained herein; nor - Any form of relationship between any ATM Forum member companies and the recipient or user of this document. Implementation or use of specific ATM standards or recommendations and ATM Forum specifications will be voluntary, and no company shall agree or be obliged to implement them by virtue of participation in The ATM Forum. The ATM Forum is a non-profit international organization accelerating industry cooperation on ATM technology. The ATM Forum does not, expressly or otherwise, endorse or promote any specific products or services. NOTE: The user's attention is called to the possibility that implementation of the ATM interoperability specification contained herein may require use of an invention covered by patent rights held by ATM Forum Member companies or others. By publication of this ATM interoperability specification, no position is taken by The ATM Forum with respect to validity of any patent claims or of any patent rights related thereto or the ability to obtain the license to use such rights. ATM Forum Member companies agree to grant licenses under the relevant patents they own on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license. For additional information contact: The ATM Forum Worldwide Headquarters 2570 West El Camino Real Suite 304 Mountain View, CA 94040 Tel: +1-415-949-6700 Fax: +1-415-949-6705 Contents 1. Introduction 1 1.1 Scope 1 1.2 Normative References 1 1.3 Definitions 2 1.4 Conformance Statement 2 2. Identification of the Implementation 3 3. PICS Proforma 5 3.1 Global Statement of Conformance 5 3.2 Instructions for Completing the PICS Proforma 5 3.3 Physical Media Dependent (PMD) Specification 6 3.4 Transmission Convergence (TC) Sublayer Functions 7 1. Introduction Prior to the conformance testing and the interoperability testing of IUTs, it is necessary to have the PICS (Protocol Implementation Conformance Statement) documents for both implementations. This particular PICS deals with the implementation of the 155 Mb/s Twisted Pair Cable Physical Layer Interface for UTP-5. 1.1 Scope This document provides the PICS proforma for the 155 Mb/s Twisted Pair Cable Physical Layer Interface as described in the ATM Physical Medium Dependent Interface Specification for 155 Mb/s over Twisted Pair Cable [1] and the Addendum to the ATM Physical Medium Dependent Interface Specification for 155 Mb/s [2], in compliance with the relevant requirements, and in accordance with the relevant guidelines, given in ISO/IEC 9646-2 [3]. 1.2 Normative References [1] af-phy-0015.000, "ATM Physical Medium Dependent Interface Specification for 155 Mb/s over Twisted Pair Cable", September, 1994. [2] af-phy-0053.000, "Addendum to ATM Physical Medium Dependent Interface Specification for 155 Mb/s over Twisted Pair Cable", January, 1996. [3] ISO/IEC 9646-2 1990, Information technology - Open systems inter-connection - Conformance testing methodology and framework - Part 2: Abstract test suite specification. (See also ITU-TS Recommendation X.290 (1991)). [4] ANSI/TIA/EIA-568-A, "Commercial Building Telecommunications Cabling Standard," October 6, 1995. [5] ISO/IEC 11801, "Generic Cabling for Customer Premises", 1995. [6] The ATM Forum Technical Committee, ATM User Network Interface Specification, Version 3.1, Prentice Hall, Englewood Cliffs, NJ, 1994. [7] ISO 8877, "Informational processing systems, Interface connector and contact assignments for ISDN basic access interface located at reference points S and T.," August 15, 1987. [8] ANSI EIA/TIA 574, "9 Position Non-Synchronous Interface between DTE and DCTE employing Serial Binary Data Interchange," 1990. [9] IEC 603-7, "Connectors for frequencies below 3 MHz for use with printed boards, Part 7: detailed specification for connectors 8 way, including fixed and free connectors with common mating feature". 1.3 Definitions ATM Asynchronous Transfer Mode HEC Header Error Control IUT Implementation Under Test LOS Loss of Signal M Mandatory MIC Medium Interface Connector O Optional O. Optional, but, if chosen, support is required for either at least one or only one of the options in the group labeled by the same numeral P Prohibited PDU Protocol Data Unit PMD Physical Media Dependent S. Supplementary information number i SAR Segmentation and Reassembly (Sublayer) SDU Service Data Unit SPE SONET Synchronous Payload Envelope TC Transmission Convergence UTP-5 Category 5 Unshielded Twisted-Pair X. Exceptional information number i 1.4 Conformance Statement The supplier of a protocol implementation which is claimed to conform to the 155 Mb/s Twisted Pair Cable Physical Layer Interface over UTP-5 is required to complete a copy of the PICS proforma provided in Section 3 and is required to provide the information necessary to identify both the supplier and the implementation. 2. Identification of the Implementation Implementation Under Test (IUT) Identification IUT Name: ____________________________________________________________ ____________________________________________________________ IUT Version: ____________________________________________________________ ____________________________________________________________ System Under Test SUT Name: ____________________________________________________________ ____________________________________________________________ Hardware Configuration: ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ Operating System: ____________________________________________________________ Product Supplier Name: ____________________________________________________________ Address: ____________________________________________________________ ____________________________________________________________ Telephone Number: ______________________________ Facsimile Number: _______________________________ E-mail Address (optional): ___________________________________________________________ Additional Information: ____________________________________________________________ Client Name: ____________________________________________________________ Address: ____________________________________________________________ ____________________________________________________________ Telephone Number: _______________________________ Facsimile Number: _______________________________ Additional Information: ____________________________________________________________ PICS Contact Person Name: ____________________________________________________________ Address: ____________________________________________________________ ____________________________________________________________ Telephone Number: _______________________________ Facsimile Number: _______________________________ Additional Information: ____________________________________________________________ PICS PICS-System Conformance Statement Provide the relationship of the PICS with the System Conformance Statement for the system: ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ Identification of the protocol This PICS proforma applies to the following documents: af-phy-0015.000, "ATM Physical Medium Dependent Interface Specification for 155 Mb/s over Twisted Pair Cable", September, 1994 and af-phy-0054.000, "Addendum to ATM Physical Medium Dependent Interface Specification for 155 Mb/s over Twisted Pair Cable". 3. PICS Proforma 3.1 Global Statement of Conformance The implementation described in this PICS meets all of the mandatory requirements of the reference protocol. ___Yes ___No Note: Answering "No" indicates non-conformance to the specified protocol. Non-supported mandatory capabilities are to be identified in the following tables, with an explanation in the comments section of each table of why the implementation is non-conforming. 3.2 Instructions for Completing the PICS Proforma The PICS Proforma is a fixed-format questionnaire. Answers to the questionnaire should be provided in the rightmost columns, either by simply indicating a restricted choice (such as Yes or No), or by entering a value or a set of range of values. A supplier may also provide additional information, categorized as exceptional or supplementary information. This additional information should be provided as items labeled X. for exceptional information, or S. for supplemental information, respectively, for cross reference purposes, where is any unambiguous identification for the item. The exceptional and supplementary information is not mandatory and the PICS is complete without such information. The presence of optional supplementary or exception information should not affect test execution, and will in no way affect interoperability verification. 3.3 Physical Media Dependent (PMD) Specification ================================================================ Item Protocol Feature Status Spec. Support Pred. Ref. ================================================================ 3.3.1 Does the IUT implement the O.1 5.1.8, Yes__ No__ ISO/IEC 603.7[9] Media 607.3[2] X__ S__ Interface Connector meeting the requirements of Chapter 10 ANSI/TIA/EIA-568-A[4]? ---------------------------------------------------------------- 3.3.2 Does the IUT implement the O.1 5.3.5[2] Yes__ No__ category 5 Media Interface X__ S__ Connector for 120 Ohms meeting the requirements of ISO/IEC 11801[5]? ---------------------------------------------------------------- 3.3.3 Does the IUT implement the O.1 5.2.4 Yes__ No__ STP Media Interface Connector X__ S__ meeting the requirements of ANSI/TIA/EIA-568-A[4], Section 11? ---------------------------------------------------------------- 3.3.4 Does the IUT implement the O 5.2.5.1 Yes__ No__ optional 9-pole D-Shell X__ S__ Active Interface Connector meeting the requirements of EIA/TIA 574:1990[8] Section 2? ---------------------------------------------------------------- 3.3.5 Does the bit stream of the M 2.1 Yes__ No__ PMD interface of the IUT have X__ S__ an external frame based upon the SONET STS-3c frame as defined in the ATM Forum UNI Specification 3.1, Section 2.1? ---------------------------------------------------------------- 3.3.6 Does the IUT transmitter M 2.1 Yes__ No__ conform to the encoded line X__ S__ rate requirement of 155.52 Mbaud +/-20 ppm? ---------------------------------------------------------------- 3.3.7 If the IUT is a "user M 2.1 Yes__ No__ device", does the IUT use a X__ S__ transmit clock which is derived from its received line signal? ---------------------------------------------------------------- 3.3.8 If the IUT is a "user M 2.1 Yes__ No__ device", in the absence of X__ S__ a valid clock derived from the received line signal, does the IUT use a free- running transmit clock that operates at 155.52 MHz +/-100 ppm? ---------------------------------------------------------------- 3.3.9 Does the IUT transmitter M 2.2 Yes__ No__ utilize NRZ line coding? X__ S__ ---------------------------------------------------------------- 3.3.10 Does the IUT transmitter M 3.2,3.3, Yes__ No__ waveform conform to the 3.5 X__ S__ output voltage, waveform overshoot and rise/fall time requirements? ---------------------------------------------------------------- 3.3.11 Does the IUT transmitter M 3.4 Yes__ No__ conform to the return loss X__ S__ requirements? ---------------------------------------------------------------- 3.3.12 Does the IUT transmitter M 3.6 Yes__ No__ conform to the duty cycle X__ S__ distortion requirements? ---------------------------------------------------------------- 3.3.13 If the IUT is "network M 3.7 Yes__ No__ equipment", does the IUT X__ S__ transmit jitter not exceed 1.5 ns peak to peak? ---------------------------------------------------------------- 3.3.14 If the IUT is "user device", M 3.7 Yes__ No__ does the IUT transmit jitter X__ S__ not exceed 2 ns peak to peak? ---------------------------------------------------------------- 3.3.15 Does the IUT transmitter M 3.8 Yes__ No__ conform to the baseline X__ S__ wander requirements? ---------------------------------------------------------------- 3.3.16 Does the IUT receiver return M 4.2 Yes__ No__ loss conform to the X__ S__ requirements? ---------------------------------------------------------------- 3.3.17 Does the IUT receiver conform M 4.4 Yes__ No__ to the input jitter tolerance X__ S__ requirement? ---------------------------------------------------------------- 3.3.18 Will the IUT achieve the O.2 2.3, Yes__ No__ BER of 10^-10 under the 5.1.1, X__ S__ conditions specified? 5.3.1 ---------------------------------------------------------------- 3.3.19 Will the IUT achieve the O.3 2.3, Yes__ No__ BER of 10^-10 under the 5.2.1, X__ S__ conditions specified? 5.3.1 ---------------------------------------------------------------- 3.3.20 Will the IUT achieve the O.4 2.3, Yes__ No__ BER of 10^-10 under the 5.3.1[2], X__ S__ conditions specified? 5.3.1[1] ---------------------------------------------------------------- 3.3.21 Does the IUT receiver meet M 4.3 Yes__ No__ the common-mode rejection X__ S__ requirement? ---------------------------------------------------------------- 3.3.22 Does the IUT Active Output M 3. Yes__ No__ Interface represent a logical X__ S__ ONE by a positive voltage on the TX+ pin with respect to the TX- pin and a logical ZERO by a positive voltage on the TX- pin with respect to the TX+ pin ? ---------------------------------------------------------------- 3.3.23 Does the IUT Active Input M 4.1 Yes__ No__ Interface decode a logical X__ S__ ONE when it detects a positive voltage on the RX+ pin with respect to the RX- pin and a logical ZERO when it detects a positive voltage on the RX- pin with respect to the RX+ pin ? ---------------------------------------------------------------- Comments: O.1 = The IUT must support at least one of these features O.2 = If the IUT operates over 100 ohm UTP link segment, it must meet BER requirement under these conditions O.3 = If the IUT operates over 150 ohm STP link segment, it must meet BER requirement under these conditions O.4 = If the IUT operates over 120 ohm copper link segment, it must meet BER requirement under these conditions ================================================================ 3.4 Transmission Convergence (TC) Sublayer Functions ================================================================ Item Protocol Feature Status Spec. Support Pred. Ref. ================================================================ 3.4.1 Does the IUT conform to M 1.2 Yes__ No__ the Transmission X__ S__ Convergence specification as defined for the private UNI in the ATM Forum Technical Committee ATM UNI Specification, Version 3.1, Section 2.1? ---------------------------------------------------------------- Comments: ================================================================